Description
Size:25W, 800GPH, 9.8ft Hygger DCP controllable 24V water pump, comes with a
special U-shape water intake shell, which makes this return pump can be used
in low water level. A powerful water pump for fish tanks, aquariums, ponds,
fountains, waterfalls, sump, hydroponics, irrigation use.Aquarium Water Pump
Features:- Ultra quiet, runs at low vibration.- Auto shut off when no water is
sensed.- High performance, energy saving up to 65% and safe operation.- With
71 settings external controller, easy to control the flow rate from 30% to
100%. - Can be used internally or externally, for salt-water or fresh water
use.- Comes with 2 kinds of water intake shells, the lowest water level can be
0.8 inch.- Durable for long time use, with anti-resistant ceramic shaft,
magnetic drive.- Easy to disassemble it by hand for cleaning, the impeller is
removable. Directions for use1. Max working water depth is 5ft. Please check
and clean the pump regularly.2. Prohibit to use the pump in flammable liquids.
Working water temps: 34-95 Fahrenheit degrees.3. The pump will stop working
when input voltage is too high, upon no water, impeller blocked, to restart
the pump please re-plug the power.4. The controller has memory function for
the flow rater, if the power goes out the controller will go back to the last
setting. 5. Don’t let the pump run dry, it will damage the motor. When use the
pump internally, please keep the pump fully submersible in water before plug
in power. When use the pump externally, make sure there are full of water in
the pump body and the pipes before plug in power.6. If you find the pump is
failed to pump water at the beginning, please try to unplug and re-plug the
power to get rid of the air inside the pump,repeat that for several times then
the pump will work normally.
