Description
RigExpert AA-230 ZOOM Antenna Analyzer 100kHz to 230MHz The analyzer is
designed for measuring SWR (Standing Wave Ratio), Return Loss, Cable Loss, of
cable and antenna systems from 100 kHz to 230 MHz. A built-in ZOOM capability
makes graphical measurements especially effective. An integrated Time Domain
Reflectometer mode can be used to locate the precise location of a fault
within the feedline system. Frequency range: 0.1 up to 230 MHz Frequency
entry: 1 kHz resolution Measurement for 25, 50, 75 and 100-Ohm systems SWR
measurement range: 1 to 100 in numerical mode, 1 to 10 in graph mode SWR
display: numerical or easily-readable bar R and X range: 0…10000, -10000…10000
in numerical mode, 0…1000, -1000…1000 in graph mode Display modes: - SWR at
single or multiple frequencies - SWR, return loss, R, X, Z, L, C at single
frequency - SWR graph, 100 to 500 points - R, X graph, 100 to 500 points -
Smith (or polar) chart, 100 to 500 points - Return loss chart, 100 to 500
points - TDR (Time Domain Reflectometer) graph RF output: - Connector type: N
- Output signal shape: square, 0.1 to 230 MHz. - Output power: -10 dBm (at 50
Ohm load) Power: - Four 1.5V alkaline batteries, type AAA - Four 1.2V Ni-MH
batteries, type AAA - Max. 4 hours of continuous measurement, max. 2 days in
stand-by mode when fully charged batteries are used - When the analyzer is
connected to a PC or a DC adapter with USB socket, it takes power from these
sources Interface: - 290x220 color TFT displaty - 6x3 keys on the water-proof
keypad - Multilingual menus and help screens - USB connection to a personal
computer Batteries are not included with the analyzer.
